C&C hayloft

Status
Not open for further replies.
PiggiePal

PiggiePal

Adult Guinea Pig
Joined
Oct 29, 2006
Messages
1,876
Reaction score
8
Points
455
Location
Cheltenham
ok so i've just managed to assemble my 5 x 2 C&C. Now i'm confused as to how to attach a hayloft. The connector things wont go on any other way (i think). Do I just make another level and balance it on top? I'm so bad at this kind of thing! rolleyesxx
 
Turn the connectors on their side so that you can join the top and the bottom. It does work, I promise. :(|)
 
but flips, the connectors wont fit both grids in one slot? I'm so spatially unaware it's hilarious! ;-)
 
Here you go.
IMG_3189.jpg

IMG_3191.jpg


You need to use both the horizontal and vertical slots in the connectors to put your grids together like this. :)
 
but that doesn't look like it's attached to any of the grids underneath?@)

thanks for taking the time to put pics up x:(|)
 
cubesconnector.jpg


The grids can be attached to the connectors several ways.
See the pic above the smooth round end is facing towards you so the grid from your C&C cage and the floor and sides of your hayloft joins together in one connector.
Whilst the connector is in this position the upright grids are pushed into the Quarter circle part of the connector rather than the straight cross section of the connector. So the floor of your hayloft grid uses the straight cross section of the connector.

Hope this helps

:)p
 
OOOOOHhh thanks so much for the explanation S&P I am going to give it a go tomorrow then hopefully my piggers can move into their new home :(|)

Will deffo provide pigtures asap to thank you all for being so patient rolleyesxx
 
Status
Not open for further replies.
Back
Top